The CR2032 battery is featured by a low self-discharge level and is applied in computer equipment.
Model: CR2032-BP5
Nominal voltage: 3 V
Nominal capacity: 220 mAh
Working temperature: -30 to +65
Nominal current of charge: 0.2 mA
Size type: CR2032
Weight: 0.03 kg
Color: Silver
The ANTEY-902 9DB GSM and GPRS antenna for signal amplification
In The Master Sky, you can buythe Antey-902 9dB GSM antenna on a magnetic base. The antenna has an increased coefficient of amplification. It is made on a magnetic base with the FME/SMA connector.
The Antey-902 9dB GSM antenna on a magnetic base has an increased coefficient of amplification. It is made on a magnetic base with the FME/SMA connector.
Antenna’s height is 61.5 cm.
Range: 900/1800 MHz
Resistance: 50 Ohm
Amplification: 9 dB
Magnetic base: 75 mm
Connector: SMA
The Antey 906 13.5dB FME/SMA GSM antenna
In Master Sky, you can buy the Antey 906 13dB GSM antenna on a magnetic base. The antenna has an increased amplification coefficient. It is made on a magnetic base with the FME/SMA connector.
The Antey 906 13.5dB GSM antenna on a magnetic base with an increased power is typically used in places with a weak GSM network signal, it helps to strengthen the GSM signal for kiosks. It is made on a magnetic base with a 3 meter cable and the FME/SMA connector.
Antenna’s height is 67 cm.
Range: 900/1800 MHz
Resistance: 50 Ohm
Amplification: 13.5dB
Magnetic Base: 75mm
Connector: FME/SMA
The GSM, SMA antenna
In The Master Sky, you can buy the dual-range GSM antenna on a magnetic base with the SMA-connector.
The dual-range GSM antenna on a magnetic base with the SMA-connector. It is designed to be used with the GSM devices that have the appropriate antenna connector.
Frequency range, MHz: 890-960/1710-1890
SWR (on the center frequency): ≤1.5
Amplification, dBi: 3.5
Polarization: linear
Resistance, Ω: 50
Connector: SMA
Working temperature, ℃: -40 ... +85
Humidity, %: 0 … 95
Overall dimensions, mm: 28x110
Weight, g: 50
The IRZ FME mini antenna
In The Master Sky, you can buy the mini GSM FME Compact Antenna for GSM modems.
An external GSM antenna with a 50mm magnetic base. Wide temperature range, steady reception and resistance to wind loads makes this antenna an excellent solution for outdoor placement on the metal surfaces.
Operating range - 900,1800 MHz
Resistance - 50 Ohm
Amplification coefficient - 5.5 dB
Connector type – FME
Size (height) - 115 cm
Cable length - 1.5 m
Wind load - 200 km/h
The Deposit machine (ADM)
In "Master Sky", you can buy the Deposit machine. A machine for an automated depositing of bills and packaging of cash into the collection bag.
The Deposit machine (ADM) - The Master SKY solutions for the banking industry cover almost the entire range of retail services of the bank, allowing to automate most of the operations, reducing the workload on the staff, or organize an automated branch of the bank. Acceptance and dispensing of the cash, issuance of the banking cards, lending, the depository - all of this is possible with The Master SKY equipment.
A machine for an automated depositing of bills and packaging of cash into the collection bag.
Features:
Recounting the bundle of bills of various nominal values with simultaneous verification of authenticity by 3 machine-readable features; Deposit of cash into the bag with the function of self-locking when removed; Printing the data on the transaction (number of deposited bill, nominal value, total amount of cash deposited).
Advantages:
Reliable steel case with multi-level break-in protection system;
Compact and economical;
High speed of counting and recognition of the bills;
Possibility of returning the bills in case of cancellation of the operation by the customer;
Storaging in the first class safe;
Patented self-locking system of the bag when removed;
Excluding the risk of receiving counterfeit bills;
Easy access to the safe during an encashment;
Easy maintenance of the kiosk due to the easy access to the kiosk modules;
Using quality components from the world's leading suppliers;
In “Master Sky” you can buy The "APP-POD" information kiosk. Public Access Point is an optimal solution for municipalities: a fully automated and multifunctional kiosk designed to simplify the provision of public services.
The APP POD information kiosk is a self-contained device that requires no special maintenance and easy replacement of consumables. Equipped with Wi-Fi module, the kiosk provides convenient access to online services, and modern design and thoughtful form factor allow you to easily fit it into any room, including the most limited spaces, attracting attention and not violating the overall style.
QR code scanner
A4 printer
Contactless NFC reader
Microphone and speakers
Thermal printer
Touch screen monitor
Possibility of individual set of options and accessories
QR code scanner
The logistics kiosk is equipped with smart scanners that allow you to read 2D and 3D codes in any form: whether it is a smartphone screen, ID card or paper media.
A4 printer
International printing format allows on-site production and issuance of checks, coupons or documents up to 210x297 mm.
Contactless NFC reader
State-of-the-art transmission technology allows the user to pay contactlessly with a smartphone or bank card.
Microphone and speakers
The self-service kiosk is equipped with several speakers and a noise-canceling microphone, which allows online communication with the operator and consultation on questions or services offered. Audio equipment in duet with the operator allows you to increase sales and carry out effective presales of goods and services.
Thermal printer
Printing technology allows on-site production and issuance of checks, coupons or tickets to the user.
Touch screen printer
Large and responsive screen provides comfort and convenience of the user in the independent use of POD, and the bright matrix of the device remains readable and functional both in the sun and under the light of soffits in the room, allowing to place POD where it will carry out the maximum conversion and efficiency.
Possibility of a customized set of options and accessories
Upon your request, we will install the necessary equipment to meet your business needs.
Dimensions:
Width - 590 mm;
Depth - 520 mm;
Height - 1801 mm;
Weight - 80 kg.
Desktop information kiosk
In “Master Sky” you can buy Desktop Information Kiosk. It is a self-contained self-service device with compact device dimensions that allow you to install it even in the most limited spaces, including tables and counters.
The desktop information kiosk is an autonomous and automatic solution that requires no special maintenance - consumables can be replaced by any employee. Compact dimensions of the device allow it to be installed even in the most limited spaces, including desks and racks. Thanks to the thoughtful and ergonomic design, the kiosk is easy to use for all categories of users, attracting attention with its form factor.
Touch glass
Thermal printer
QR-code scanner
Possibility of individual set of options and accessories
Touch Glass
Desktop information kiosk is equipped with high sensitivity touch glass, which makes the process of data entry and selection of relevant information fast and the use of the kiosk interface comfortable.
Thermal printer
Instant receipt of coupons, receipts, tickets, coupons allows you to realize the built-in thermal printer.
QR-code scanner
Modern QR-code scanner quickly reads 2D and 3D codes from ID cards and other information carriers: documents or smartphones.
Possibility of individual set of options and accessories
On your request we will install the necessary equipment to solve your business tasks.
Dimensions:
Width - 508 mm;
Depth - 362 mm;
Height - 568 mm;
Weight - 35 kg.
Information kiosk "ProInfo"
In "Master Sky" you can buy an information kiosk “ProInfo”. This device is designed to get rid of live queues and avoid conflict situations.
Information kiosk "ProInfo" is an autonomous and automatic solution that does not require special maintenance - replacement of consumables is available to any employee. The compact size of the device allows it to be installed even in limited spaces, saving useful floor space.
Monitor with touch panel
Thermal printer
QR code scanner
Possibility of individual set of options and accessories
Monitor with touch panel
The device interface and touch panel allow the user to make inquiries and data entry as fast and convenient as possible.
Thermal printer
Instant receipt of coupons, receipts, tickets, coupons allows to realize the built-in thermal printer.
QR-code scanner
Modern QR-code scanner quickly reads 2D and 3D codes from ID cards and other information carriers: documents or smartphones.
Possibility of individual set of options and accessories
On your request we will install the necessary equipment to solve your business tasks.
The Smart Sanitizer
In The Master Sky, you can buy the Kiosk for hands and smartphones disinfection - Smart Sanitizer. The Smart Sanitizer is designed by our engineering team according to the current world conditions, sanitary requirements and has a distinct advantage in terms of the quality of design and a number of technical specifications, ensuring the autonomous and high performance, while also focusing on the ergonomics and design of the device.
The main task of the Smart Sanitizer is the disinfection of hands of workers/customers, smartphones/phones, real-time temperature measurement without human involvement (i.e. human resources optimization, for example, there is no need for having a security guard for a personal measurement of the temperature).
Furnishing these devices in the offices, shopping malls, and trading centers would reduce the probability of infecting the staff and the customers with the Covid 19, and would also have a positive impact on the loyalty level of your customers.
The Smart Sanitizer is designed by our engineering team according to the current world conditions, sanitary requirements and has a distinct advantage in terms of the quality of design and a number of technical specifications, ensuring the autonomous and high performance, while also focusing on the ergonomics and design of the device.
The Smart Sanitizer’s functionality:
1. Hands disinfection:
Disinfection is achieved with a disinfecting/antiseptic agent, which is automatically sprayed when the movement sensor detects the hands in the treatment area. The volume of the tank in the device equals to 1.8 - 3.3 liters, allowing up to 3,200 sprays to be made when completely filled. Any of the current types of disinfecting agents can be directly filled into the tank since the spray nozzles that we've selected and installed make it possible.
2. Smartphone disinfection:
Disinfection is achieved within 30 seconds in a specifically designed pocket equipped with the bactericidal UV belts.
3. Thermal imaging device with the Web camera installed:
Temperature measurement is achieved by a thermal imaging device integrated into the unit, which together with the installed Web-camera allows to measure the temperature and photograph the live image of the person using the Smart Sanitizer. If required, the software package can be configured to sending the received data to the relevant/interested division of the company (HR, Security, security room, etc).
4. Additional solutions:
The Smart Sanitizer is equipped with a 19.5 inch IPS monitor, which allows you to broadcast either promotional videos of the company's products and services, announcements of the items for future sales, which is definitely an additional tool of attracting the attention of customers, or videos for the employees of the company.
